Oil hole HSS twist drills - Right hand cut - Execution N - Morse taper shank.

Oil deep hole HSS twist drills - Right hand cut - Execution S - Morse-taper shank

Coolant inducer sockets for maxima twist drills Morse-taper shank with cooling holes


Sleeves or shell for coolant inducer sockets

Reamer for tube sheet holes - 9.75 to 64.3 mm with widia metal tips.

Self-centering grooving tool for tube sheet with cooling holes. Used also to dress grooves by means of a common portable drill.

Grooving tool for holes dia. 7 to 30mm

 
Tube end facer. It is used after rolling to face the tubes of the second tube-sheet so as to obtain the same tubes stand outs

 
Milling cutter for facing, bevelling and finishing tubes. It is used also for removing the welding material while replacing the tubes in the boilers

 
Combined tube facer for simultaneous trimming/bevelling of tube ID and OD, adjustable according to the diameters and gauges

 
The tube cutter F/796 is used in the field of new tube bundles manufacturing, it solves the problem of removing in bulk the tube stand-out between 20 and 70 mm. This tool is used before the traditioinal portable pipe bevelling machines thus considerably reducing the working times